Since we are talking about an official update and since we will flash the UVUAMDL firmware on a Samsung branded handset, for completing this tutorial we will use Odin. Therefore, you don’t have to worry as there won’t be used complex and risky apps or programs. Odin, is a dedicated tool used on update and root operations; the program is designed and offered by Samsung, so you have nothing to worry about.
Follow the steps below:
- Remember to install the proper drivers on your computer.
- Then, download Odin and unzip the file on your computer.
- Install the tool and run Odin.
- On desktop, download the update file and unzip the same.
- You can download the update package from here.
- Turn off you phone.
- Reboot in download mode -> press and hold Power, Volume Down and Home buttons.
- Connect your S4 with the computer.
- Check Odin: the “added” message should be there and the ID:COM should be yellow or blue.
- If not, you must reinstall the drivers; then repeat the steps from above.
- From Odin you need to select “PDA”.
- Then you have to pick the firmware file from the desktop.
- Don’t check the re-partition option from Odin, also don’t make any other changes on the program.
- Just click on “start” and flash the ROM.
- In the end, you will see the “pass” message displayed.
- Unplug the USB cord and reboot your device.
Posted in: Android Tutorial,Samsung Tutorial,Tutorial,Update
0 comments:
Post a Comment