Hard Brick warning - Read Before Bootloader unlock




This post is intended to point your attention to the simple fact that there's a hardware imposed danger to hard brick your Xperia X8 and W8, applies to E15i/a and E16i/a, at the attempt to unlock the boot loader!

The phones affected by the problem are units being manufactured at, and after, 11W29!

To check if your device is affected by the problem follow this simple steps:
  • Turn off the phone and open it up
  • Take out the battery
  • Look at the sticker below
If the date code on the sticker reads 11W29, or any later date (11W30, 11W31, 11W32, 11W33, ...), DO NOT attempt to unlock the boot loader.

These phones ship with a revamped chipset configuration having the security hole the boot loader unlock uses effectively closed. This means that upon unlocking the boot loader your phone will end up as a hard brick - and you will have NO means to revive the phone yourselves. You either have to send it off to Sony Ericsson for repair (recommended solution) or find a phone repair shop being able to resurrect shot devices!

The symptom you will experience when unlocking the boot loader on an affected device is like this:
The boot loader unlock will most likely go through fine
At restart the phone will show NO signs of life anymore.
NO LED, NO LCD output, NO vibration.

This is the point where you can not do anything anymore yourself to resurrect the device.

You have been warned, DO NOT TRY to unlock the boot loader on phones manufactured PAST 11W29!

How to Unlocking Bootloader on Sony Xperia X8 Using SE Tweaker Tool (Tutorial)




SE Tweaker Tool is a Tool + Guide to make some tweaks to ur phone With ease which includes of all the necessary utilities for many devices. Unlocking the bootloader of your phone will restore the original sim lock of your phone (if you had any) unless if you unlocked with EMMA/IMEI unlock code or it was factory-unlocked or if SE unlocked it! However, some users have reported that using msm7227_semc.cmd on their sim-unlocked phones did not restore the sim lock onto their phone.

Read this before doing Unlocking Bootloader

NOTE: Dealing with the bootloader is highly dangerous and can result in a hard brick if you don't follow the proper instructions. Then, you will have to go and repair your phone by sending it to SE. I am not responsible if your phone dies on you because you didn't follow instructions or you screwed up somehow. Unlock the bootloader on your sim unlocked phone AT YOUR OWN RISK!

Only For people getting error related iscoolbutton.ocx.. Just Run the ocx_fix.bat in the downloaded tool and then Run the SE Tweaker Tool..

Requirements: 
  • Rooted phone, Sony Ericsson PC Companion installed in PC, Courage
  • You do not need to have a sim lock on your phone to unlock your Bootloader.

Recommended:
  • Disable your Antivirus (it might find a "virus" in ADB.exe even though there isn't one and might even interfere in bootloader unlocking process) 
  • USB debugging enabled.

Download the files needed for the unlock.
  • Download Flashtool (needed for S1tool to work properly and for loading custom kernels next time) and install it (not necessary if you already have Flashtool):
  • Download and install Flashtool v0.5.3 here (follow instructions on the website).
  • After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate.
  • Then restart your computer. if you dont Find GORDAN'S gate.exe in the drivers folder download it from my attachments.

Steps To unlock Bootloader:
  • After installing Gordans Gate and the flashtool Turn off your phone.
  • Download SE Tweaker Tool also Mirror[Mediafire] and unzip it.
  • Run SE_Tweaker_Tool.exe from it.
  • NOTE: If no flashtool download from the dialog box appeared after running unlockbootloader.exe
  • Turn off ur phone
  • Select unlock_bootloader button.. run S1tool button to check if the your phone has SIM UNLOCK CERTIFICATE.[i.e click on "Do" in s1tool and compare the output]
  • Boot your phone into flash mode (make sure you installed Gordon's Gate and usb debugging is on). All users, press and hold back button while connecting cable from PC to phone. Continue holding back button until you get some output. The LED on your phone should flash green if it is in flash mode.
  • Click on how it should look.. it will give u an idea how the output will be..
  • NOTE- At this moment you should know if you have SIM UNLOCK CERTIFICATE or what ever the output was.. keep that in mind.. 
  • Now disconnect[/COLOR] your phone n boot it up.Connect it again to PC (make sure your USB DEBUGGING is enabled and antivirus is disabled) 
  • Now click the check box which is right for you [Read them carefully it will be according to the output you got with s1tool] run the corressponding button.. 
  • After it proceed to check if the unlocking of bootloader was done by clicking Check If your "Bootloader is unlocked And Proceed" button..
  • Reboot your phone to flashmode as before.. Run s1tool.. N compare the output.. 

If the line RUNNING S1_EROM FROM VER "#8A02$" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A02$"), your bootloader has been unlocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A02$"), your bootloader is NOT unlocked.


Re-locking the Bootloader Follow the steps in the Tool

DOWNLOAD THE KERNEL WHICH YOU WANT
[Note: If it is downloaded in *.zip or *.rar format just open with any zip tool like Winrar or 7zip tool n extract the *.ftf file to your drive n later put in into the /firmwares folder of flashtool and follow below steps to Flash]

How to flash custom kernels:
  • Put the *.ftf file in the /firmwares folder. ( flash only the .ftf file.)
  • Open Flashtool.
  • Click Flash.
  • Select (kernel name).ftf.
  • Turn off your phone.
  • Connect your phone in flash mode (only when the popup window prompts for you to do so). (To boot into flash mode, press and hold back button while connecting your phone to the PC using an usb cable).
  • Disconnect your phone (do so only when the popup window to prompts you to disconnect your phone).
  • Reboot and you have a custom kernel! 
  • Confirm by going to Settings --> About Phone --> Kernel version. It should have the name of the kernel you flashed.
To flash back to stock kernel, download the file here and follow steps listed above.


How to Update Sony Ericsson Xperia X8 into Android 4.04 (Ice Cream Sandwich)




Hello guys, do you want to taste having Ice Cream Sandwich on your Xperia X8. If you do, then i will explain the tutorial How to Update Sony Ericsson Xperia X8 into Android 4.04 (Ice Cream Sandwich). You should know that this tutorial will use MiniCM9 which is an unofficial port of CyanogenMod 9 for the SEMC msm7x27 devices. MiniCM9 is running Android ICS on top of the nAa-ics kernel.

Features:
  • Built for MDPI
  • Full hardware acceleration (the ICS way)
  • Camera
  • Opengl rendering
  • MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
  • App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
  • Android's native App2sd (move to sdcard, storing to fat)
  • In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
  • Modular Undervolting handled Settings -> Performance menu (by default not active)
  • KSM support
  • Extra Settings display option for Ultra brightness, also handled via notification bar icons
  • Smooth 2D scrolling in menus
  • Native Wifi Hotspot
  • Native USB tethering
  • Native Bluetooth tethering

Not Working:
  • HW Video encoding / decoding

Note:
  • The instructions in this guide are intended for use with the Sony Xperia X8. Applying these instructions on another device or model may produce undesired outcomes.
  • The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
  • Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
  • Read and understand the whole guide first before actually performing the instructions.

This installation requires you to have:

Before installation of Android 4.04 on you X8, it is better to back up your phone to keep your files and data setting on your phone save. Make sure you have rooted your X8 and xRecovery is installed on your phone. The back up process we use now is using the tutorial below using xRecovery from the files above. For the tutorial to back up your X8, follow the link below:
How to Backup Your OS Android Phones Using xRecovery
Make sure that your battery has a charge of at least 80% to prevent your device from shutting down in the middle of the update process.After you backup your files from your phone, follow these steps below:

Instructions:
  • Download the MiniCM9-3.0.4.zip from the release link 
  • Backup your /data contents: contacts, apps, sms, etc. or backup via x-recovery above
  • Move the MiniCM9-3.0.4.zip  to the root folder of your sdcard. Download the suggested Google Apps for CM9 from here (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
  • Make sure you are using the nAa-ics kernel
  • Enter CWM and:
  • - Select 'backup and restore -> Backup'
  • - Select 'wipe data/factory reset' (MUST DO)
  • - Flash the MiniCM9-3.0.4.zip  To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM9-3.0.4.zip
  • - Flash gapps in the same way
  • Reboot (first boot will take ~2 mins)
  • Once your device has booted, you can use the nAa notification to register for upcoming updates. This way you can get update notifications on new versions of MiniCM9 and the nAa-ics kernel!
Congratulation! Now you have Android 4.04 Ice Cream Sandwich on your phone. Feel free to leave a comment on the section below.

Droid Razr HD and Droid Razr Maxx HD: The Great Battrey Performance with The Lowest Price


Both devices have been announced by verizon to arrive soon on October 18. This news has been officially confirmed on the verizon's blog itself. The Motorola Droid Razr HD will run from $199.99 ,while the Motorola Droid Razr Maxx HD will cost a steeper $299.99. Both devices feature large 4.7-inch HD AMOLED screens and access to Verizon 4G LTE.

There is no difference between the specs of the two smartphones, save for the battery and internal memory size. Both handsets feature dual-core Qualcomm Snapdragon S4 silicon, 4.7" HD screen, 8MP, and Android 4.0 Ice Cream Sandwich. An update to Jelly Bean is in the pipeline for the duo before the year's end.

GENERAL
2G Network CDMA 800 / 1900
GSM 850 / 900 / 1800 / 1900
3G Network CDMA2000 1xEV-DO
HSDPA 850 / 900 / 1900 / 2100
4G Network LTE 700 MHz Class 13

BODY
Dimensions 131.9 x 67.9 x 8.4 mm
Weight 146 g
DISPLAY Type Super AMOLED capacitive touchscreen, 16M colors
Size 720 x 1280 pixels, 4.7 inches (~312 ppi pixel density)
Multitouch Yes
Protection Corning Gorilla Glass

SOUND
Alert types Vibration, MP3, WAV ringtones
Loudspeaker Yes
3.5mm jack Yes

MEMORY
Card slot microSD, up to 32GB
Internal 12 GB storage, 1GB RAM

DATA
GPRS Class 12 (4+1/3+2/2+3/1+4 slots), 32 - 48 kbps
EDGE Class 12
Speed Rev. A, up to 3.1 Mbps, LTE, HSPA+
WLAN Wi-Fi 802.11 a/b/g/n, Wi-Fi hotspot
Bluetooth Yes, v4.0 with LE+EDR
USB Yes, microUSB v2.0

CAMERA
Primary 8 MP, 3264x2448 pixels, autofocus, LED flash
Features Touch-focus, geo-tagging, face detection, image stabilization
Video Yes, 1080p@30fps
Secondary Yes, 1.3 MP

FEATURES
OS Android OS, v4.0.4 (Ice Cream Sandwich), upgradable to v4.1
CPU Dual-core 1.5 GHz
Sensors Accelerometer, proximity, compass

Messaging
SMS(threaded view), MMS, Email, Push Email, IM
Browser HTML, Adobe Flash
Radio No
GPS Yes, with A-GPS support and GLONASS
Java Yes, via Java MIDP emulator
Colors Black, White

- Active noise cancellation with dedicated mic
- Splash resistant
- microHDMI port
- SNS integration
- Google Search, Maps, Gmail
- YouTube, Google Talk, Picasa integration
- MP3/AAC+/WAV/WMA player
- MP4/H.263/H.264/WMV player
- Organizer
- Document viewer/editor
- Voice memo/dial/commands
- Predictive text input

BATTERY
Standard battery, Li-Ion 2530 mAh


LG Nexus Phone Shows Up for Sure, Many Photos are available




Another nexus phoes apparently will get to the reality. This time the phone which is called LG E960 or also called Mako is really amazing to compete with the other devices. This nexus device may become this year's nexus device or also named Google Optimus Nexus.

Beside the high-quality photos there is not much new information about the LG Nexus phone. The pre-production phone these guys have runs currently the latest Android Jelly Bean 4.1.2. On the front, there's a 4.7-inch screen with a resolution of 768x1280px. On the back, there's a 8 megapixel camera.

The real disappointment is on the inside. Despite the presence of the powerful quad-core Qualcomm chipset with 2GB of RAM, the built-in storage is only 8GB and there's no card slot for expansion. Judging on the limited storage, LG wouldn't like it for their Optimus Nexus phone to compete with their other flagships. It's much like how Samsung supplied a measly 5 megapixel camera on their Galaxy Nexus.

The leaked photos:



How to Root and UnRoot Samsung Galaxy Y Duos S6102 (Tutorial)


Samsung Galaxy Y Duos S6102 or also known as Samsung GT-S6102, and Samsung GT-S6102B is very unique, beside its price which is very affordable, the features also can beat other Android phones. At one point an almost exclusive Nokia territory, the low-end market is now fair game for cheap smartphones and the Galaxy Y Duos doesn't have to try hard to make itself comfortable.

The Galaxy Y Duos builds on the single-SIM Galaxy Y with a slightly larger screen, a higher-resolution camera, larger capacity battery and, most importantly, an extra SIM slot. The latter will, of course, be its key selling point in emerging markets, but here's what else is on offer. The Galaxy Y Duos is aimed at entry level smartphone enthusiasts who want to make the best out of a limited budget. This dual-SIM droid is based on the original Galaxy Y - which in turn was a cut above the usual dumbphone.

However, when you need to access all the features and put everything on it, you should root your device first in order to get the access. There are many advantages you get after rooting the device. So, no more talk here we go the tutorial to root and unroot the Root and UnRoot Samsung Galaxy Y Duos S6102.

Caution: In my experience nothing has ever gone wrong with rooting. There is always that slight chance something can mess up. Use caution and only do this if you want to. I am not responsible if anything happens (but I really don’t think anything will happen if you do everything right)  Also rooting voids your warranty but don’t worry, unrooting should give it back like nothing ever happened.!!

Note:
  • The instructions in this guide are intended for use with the Samsung Galaxy Y Duos S6102. Applying these instructions on another device or model may produce undesired outcomes.
  • The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
  • Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
  • Read and understand the whole guide first before actually performing the instructions.
  • This Procedure will definitely void your warranty, although the warranty can be claimed by un-rooting your device.
What you need to prepare:
  • Samsung Galaxy Y Duos S6102 and a PC
  • Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data. Guide from Here
  • Make sure your device has at least 75% of phone battery charge.

Steps to Root Galaxy Y Duos S6102:
  • Download and copy the Update.zip file into your sd card. You can even put it in a folder if you want.
  • Turn your phone off
  • Boot your phone into recovery mode. To do that, hold HOME+POWER buttons. When the screen turns on and you see the Samsung logo, let go of POWER but keep holding HOME. After the Galaxy Ace logo shows up and disappears, you should enter recovery mode. You can let go of HOME now.
  • Now in recovery mode, you can scroll up and down using the VOLUME UP and VOLUME DOWN buttons and select using the HOME button.
  • Scroll to the second option “apply update from sdcard” and press HOME to select.
  • Scroll to the Update.zip file and select it (if you put it in a folder, find and open that folder and then select Update.zip
  • After it’s done installing, select “reboot system now” and wait for the phone to reboot
  • To check if your phone is rooted, go to you app drawer and look for an app called superuser with an icon of a pirate android with cross bones. If you see it, your phone is rooted.

Congratulations! You’ve officially rooted you galaxy Y Duos!! Now what if you want to go back to unrooted for some reason , or just for the heck of it?? It’s easy. Very similar to rooting.


Steps to UnRoot Samsung Galaxy Y Duos S6102
  • Backup your System first (Needed)
  • Now download the UnRooting File from Above (unroot.zip)
  • Now copy unroot.zip file to the SD Card. Do Not put it in any folder. It ain't work.
  • Turn Off your Device and go to Recovery Mode By Pressing and Holding this Key Combination Volume Up + Home Button + Power Button.
  • Once you entered into the Recovery Mode. You will see the Blue Color User Interface where you can't use Touchscreen. Instead use "Volume Up and Volume Down to move Up and Down". And "Home Button to Select". And "Power Button used to go Back"
  • After that select "Apply Update from SDCard" option and choose "unroot.zip".
  • Once Patching was successful. You have to Reboot your Phone by select "Reboot System Now".
  • Navigate to Menu, If you cant find "SuperUser" in your app menu. Vola!!!! You're successfully UnRooted your Galaxy Y Duos...
Now, your Samsung Galaxy Y Duos S6102 has been unrooted and get back your warranty.

Apple iPhone 5 : The Latest iPhone Specification, Reviews, and Prices


For the rest of world, every single person must know about iPhone. Yes, it is the smartphone produced by Apple beside the iPod, iPad, and the rest of Apple products. After the little brothers of iPhone series have kicked the smartphone world such as Samsung, Nokia, Blackberry, and others.

When the news of iPhone 5 came out, people are wondering what it could brought inside this latest iPhone 5. Many speculations and criticisms are coloring the news concerning it should be the most featured and advanced phone now, considering the rivals (Samsung, Nokia, and others) already brought something good for people. For the example, Samsung presents Samsung Galaxy S3 with Android Jelly Bean put inside, while Nokia also brings something better which is Nokia Lumia 920 featured with Windows Phone 8.

However, talking about phone quality, people have different views and it almost depends on their needs their self. The better phone for them is what they need right now. The manufactures only provides the advanced features to be chosen. The innovation that we are waiting on iPhone 5 has barely comes. It might make someone dissappointed with the features presented on this iP5. For those who have money can choose this option. Let's see the specification of iPhone 5, below:

GENERAL
2G Network
GSM 850 / 900 / 1800 / 1900 - GSM A1428
CDMA 800 / 1700 / 1900 / 2100 - CDMA A1429
3G Network
HSDPA 850 / 900 / 1900 / 2100 - GSM A1428
CDMA2000 1xEV-DO - CDMA A1429
4G Network
LTE 700 MHz Class 17 / 1700 / 2100 - GSM A1428 or LTE 850 / 1800 / 2100 - GSM A1429
LTE 700 / 850 / 1800 / 1900 / 2100 - CDMA A1429
Announced 2012, September

BODY
Dimensions 123.8 x 58.6 x 7.6 mm
Weight 112 g

DISPLAY
Type LED-backlit IPS TFT, capacitive touchscreen, 16M colors
Size 640 x 1136 pixels, 4.0 inches (~326 ppi pixel density)
Multitouch Yes
Protection Corning Gorilla Glass, oleophobic coating

SOUND
Alert types Vibration, propriety ringtones
Loudspeaker Yes
3.5mm jack Yes

MEMORY
Card slot No
Internal 16/32/64 GB storage, 1 GB RAM

DATA
GPRS Yes
EDGE Yes
Speed DC-HSDPA, 42 Mbps; HSDPA, 21 Mbps; HSUPA, 5.76 Mbps, LTE, 100 Mbps; Rev. A, up to 3.1 Mbps
Wi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi Plus Cellular
Bluetooth Yes, v4.0 with A2DP
USB Yes, v2.0

CAMERA
Primary 8 MP, 3264x2448 pixels, autofocus, LED flash
Features Simultaneous HD video and image recording, touch focus, geo-tagging, face detection, panorama, HDR
Video Yes, 1080p@30fps, LED video light, video stabilization, geo-tagging
Secondary Yes, 1.2 MP, 720p@30fps, videocalling over Wi-Fi and 3G/4G

FEATURES
OS iOS 6
Chipset Apple A6
Sensors Accelerometer, gyro, proximity, compass
Messaging iMessage, SMS (threaded view), MMS, Email, Push Email
Browser HTML (Safari)
Radio No
GPS Yes, with A-GPS support and GLONASS
Java No
Colors Black/Slate, White/Silver
- nano-SIM card support only
- Active noise cancellation with dedicated dual mics
- Siri natural language commands and dictation
- iCloud cloud service
- Twitter and Facebook integration
- TV-out
- Maps
- iBooks PDF reader
- Audio/video player and editor
- Image editor
- Voice memo/command/dial

BATTERY
Standard battery, Li-Po
Stand-by Up to 225 h (2G) / Up to 225 h (3G)
Talk time Up to 8 h (2G) / Up to 8 h (3G)
Music play Up to 40 h


Price
As it's evident, the iPhone 5 prices are slightly higher than what the iPhone 4S used to cost when it launched (£499 and €629, respectively). Now that the iPhone 5 has been announced however, the iPhone 4S prices have already been slashed across European Apple stores and now starts from £449 and €579, respectively.





For you who want to have this latest iPhone 5 should consider if this is the one you are looking for.

Source: gsmarena.com